Parawing Repair and Care

So, you’ve just received your ROGER, had a couple of sessions, or maybe you’re considering buying one and have some off-the-water questions about caring and repairing your ROGER.

We’re going to go over the basics of caring, packing and repairing your parawing so you’re able to get the most out of your ROGER. This guide covers the essentials to keep your ROGER in top shape.

Packing your ROGER Parawing

Properly packing your ROGER ensures it stays in good condition and saves you time on your next session. Here’s what you need to know:

Drying: Before packing, make sure your parawing is completely dry and the lines are tangle-free. The quickest way to dry it is to fly it on the beach until dry. Alternatively, hang it in a garage or drying room, ensuring the canopy is not bundled up.

Rinsing: If you frequently use your ROGER in saltwater, it’s worth occasionally giving it a freshwater rinse, focusing particularly on the lines and bar.

Folding: Folding the parawing can be a bit awkward, but taking the time to pack it properly prevents bridle and line tangles, saving you time before your next session. Here is our recommended folding method before placing it in its bag.

1. Place dry parawing on the ground.
2. Fold parawing in half wingtip to wingtip.
3. Fold in half again leading edge to trailing edge, lay bridle lines inside the fold.
4. Place the bar on the wingtips.
5. Gently roll the parawing.
6. Place it in its bag and look for the next forecast!

Parawing Repair

Accidents happen, but most damage to your parawing is easily repairable. The two most common areas of repair are the canopy and bridle lines.

Canopy Repairs

Thanks to its single-skin design, any reputable paraglider or sail repair service should be able to fix tears or rips in the canopy with ease.

Bridle Line Repairs

If you damage a bridle line, replacing it is straightforward. The ROGER has four sets of bridles leading to three attachment points on the bar.

Two bridles connect to the front handle. One connects to the middle.One connects to the rear.

Steps to Replace a Bridle Line:

1. Remove the rubber sheath to reveal the carabiner.
2. Unlock the carabiner to free the bridle set. Easiest is to use a pair of pliers.
3. Detach the damaged line from the canopy—this is secured with a simple lark’s head knot (loop-through-line knot) attached to a small tag-loop.
4. Replace the damaged line with the correct length of Dyneema line.
5. Ensure all lines are clear and tangle-free.
6. Re-loop the correct bridle lines through the carabiner and then close the carabiner
7. Slide the rubber sheath back over.

Quick and easy!

Keeping Your ROGER Ready

Taking care of your ROGER is simple and ensures you get the best performance session after session. Drying and packing it properly will save you time on the water, while quick maintenance and repairs keep it flying like new. Whether you're storing it for the next forecast or replacing a bridle line, a little care goes a long way in extending the life of your parawing. Treat it well, and it’ll keep delivering you great sessions.